MaxTube
homeproducts and servicescase historiesTechnical Resourcesnewscontact us
 

 
Test Reports
 

DUOLINE is a well established product having been used successfully in numerous countries in any and all oil field conditions, and as such, quality and safety trials have been conducted on the full product range. We value the results as part of the fundamental support of the quality and integrity of our business. Please click on any one of the titles to view the article summary.

Rapid depressurisation test, 240°F, 2500 psi
Long Term Exposure, 250°F, 3000 psi
Long Term Exposure, 200°F, 7500 psi
Long Term Exposure, 300°F, 4000 psi
Combined Loading Stress Tests

Wireline Abrasion Field Test
Seawater Erosion Test
CAPCIS Long Term Corrosion Test
Weatherford Perforation Test

The testing summaries below illustrate a cross sampling of in-house as well as customer funded testing that demonstrate DUOLINE’s ability to perform in extreme conditions typically encountered by oilfield tubulars.

WEATHERFORD PERFORATION TEST

WEATHERFORD ARTIFICIAL LIFT SYSTEMS, LAFAYETTE, LOUISIANNA, 1998

A DUOLINE 20 lined 3-1/2" tubing joint was run in a test well, and perforated using a jet charge type perforator to analyze any potential liner damage caused by the perforating process. A pack-off was set in the tubing joint to allow pressurizing the tubing to 500 psi with water during the first shot. The second charge was set off while the tubing was dry and had no pressure. It was concluded that the perforation done under pressure with water caused little or no disturbance to the liner outside the perforated hole. The perforation made while the tubing was dry and at ambient pressure caused significant damage and unraveling of the fibreglass around the perforation. In addition, it was concluded that neither perforation caused damage sufficient enough to obstruct any wireline maintenance that might be required after the perforation.

For further information please use our General Enquiry Form or for product selection please complete the DUOLINE Selection Form.

Return to Technical Resources

Click here to use the General Enquiry FormClick here to use the DUOLINE Selection Form